Dear Team,
I add one ip in solarwinds NPM, after adding, it is showing "hardware status unknown" . i am not able to see the interfaces traffic utilization as showing "No data available"
but node added successfully in the NPM. i check the SNMP community string ,test is also successful.
what will be the reason for these, any Device poller issue.
Please check the attached file for better idea.
Many thanks for your response.
Ersahd SM.
I am trying to add vCenter 5.1 to our SolarWinds system. We current have a vCenter 4 in there and is working fine, but we are looking to upgrade to vCenter 5. I have vCenter 5 all setup, but SolarWinds will not connect to it when I provide it valid credentials. The only differance between the two vCenters is that vCenter 5.1 is on the Appliance from VMware while vCenter 4 is on Windows. Has anyone else had this issue? Or does anyone have an idea of what might be wrong?
We are currently running Orion Code 2012.2.0 and NCM 7.1.1.
hi guys
the interface on my router that connects to the lan is receiving loads of input errors, all of them are overruns what could be causing that and how would i go about stopping them?
kind regards
matt
Hi
I'm getting an error when testing Exchange 2007-2010 Statistics with PowerShell on Exchange 2010 SP1.
Error:
Testing on node EXCHANGEMAILBOXSERVER: failed with 'Down' status.
Output: =====================================
Message: Wrong version argument. Should be 2007 or 2010.
Orion is installed on Windows 2008 R2 and exchange management tools are installed.
Any help would be greatly appreciated.
Micah
Hi everybody,
I don't know why but all the interfaces' status of switches in the network have been changed to "Interface Disappeared". Does anyone have any idea in this regard?
I am using version 10.0 of NPM.
Very Happy..! I just passed through my SCP certification.... Earned my badge!!
Thanks team for all those wonderful blogs and guides..
Regards,
Prashanth S
-India
+1
Hi Team,
I just passed my SCP exam today few hours ago. Thanks Gerry and team for your support.
I didnot get any SCP number/Certificate id though. Kindly let me know when will I get the ID and also about the hard copy of my certificate.
Thanks again team.
My Details :
Login Id : SWI00010853
Regards,
Prashanth S
I've been playing around another idea:
To manually set the secondary IP Address of each machine as a Custom property, and then use it in the HTTP Monitor on my template.
It's still very "manual", but saves the time it takes to drill into the HTTP Monitor inside the template of each node and bypass the ${IP} macro.
However - I can't seem to get SAM's HTTP Monitor to use this custom property as a macro variable.
Am I missing something, or is it simply not supported?
David,
This error is due to scheduler unable to login to report web with the credentials provided. Please check if the credentials used for running the report in report scheduler are valid and are working fine and have adequate permissions.
Thanks,
syed
Was this ever added? I'm running into the same issue.
Where is the best place to receive Solarwinds Orion training.
I have contacted Loop 1 and Corona Services. Are their others?
Also does anyone know of any local support/Discussion type groups meeting in or around the Atlanta area?
Thanks!
This may be worth additional conversation with me offline or with a Sales Engineer, but if I understand your question correctly I think you are using thinking about FoE and APE incorrectly.
Have you seen these?
I am very interested in getting Netscaler flows int NTA, as well. I hope it is coming soon.
I have run into this issue on several occasions, usually when the server has experienced some kind of change or issue. This included a VMotion (in a virtual environment) that caused some issues, as well as a reboot after patching and some module updates. Normally I was logged into the server as myself, and when I tried to troubleshoot the issue as myself, I did not have success. I eventually discovered the problem, and then used it going forward on numerous occasions. We had set up a network account for our Orion environment, and the reports were set to run daily under this account. I logged onto the server using this account, and then opened up each report with the account and resaved it (and re-entered the credentials upon saving). To test, I then ran each report for delivery immediately and verified, since I had myself as a recipient on each report to make sure they ran daily. It was almost like I had to reapply the credentials occasionally.
There is no way that I have found in the web or admin interface to access the session timeout variable. Since the whole system is an appliance based on apache-tomcat, I think you would need to edit the session-timeout value in /opt/apache-tomcat/webapps/ROOT/WEB-INF/web.xml. However, you would need access to the OS which is not provided or supported by SolarWinds.
I would say that CLI is absolutely critical. Most often because something has happened which made the GUI inaccessible, or I need to configure an option that cannot be configured via the GUI. Obviously, with a well written GUI, the second point is invalid. Far too often in my experience, a patch or system issue has made the GUI non-functional, and we've had to resort to CLI administration until the vendor could restore GUI access.
Is there any way to have a different color for each calendar or is it only different colors for each group?
Does the spop.conf query its info directly from a file on the LEM box? For some reason when installing the agent on a brand new machine the spop.conf is populating with the old appliance IP address. When LEM was first installed it was using .164 as its IP. We have since moved the vm to a beefier box and re-deployed it with an IP of .167. I can ping the DNS name just fine, and have verified there are no stale records showing the old .164 address. I can also telnet to port 37891 via the new IP. Ultimately I can edit the spop.conf and manually change the IP to .167 but it's very annoying. The user guide mentions clearing the agent certificate but so far I have not found any in the local cert stores.
